Network Setup (Optional)

Setting up the printer networking

Tools required

  • None

Synopsis

In order to use the more advanced capabilities of the printer, it’s necessary to connect it to a network.

From there you’ll be able to access the advanced web interface and monitor prints from another device, such as a workstation or tablet.

The printer will also gain access to firmware updates from 3D Labs directly, ensuring the latest functionality and fixes are always up-to-date on your machine.

Instructions

  1. Connect the ethernet cable to the network port.

    If you require WiFi, you can purchase a wifi adapter from 3D Labs to connect it to your wireless network.

WiFi is not supplied by default due to ITAR and other industry security regulations, and security requirements of most businesses.

  1. Obtain the IP address of the machine:

    a. Press Settings on the touchscreen.

    b. Press Network on the touchscreen.

  1. Note the IP address shown on the screen.
  1. Enter the IP Address into the address bar of your browser. Do not enter the trailing port number, only the IP address is required.

If you require a valid SSL certificate, please contact [email protected].

  1. The default login information is Username: admin Password: 3dlabs

Change the password immediately after logging in to the printer.